Welcome to the site! Take a minute to register and join us. It's FREE! (and fun)
The ORIGINAL Aztek Fan Club Welcome, Guest. Please login or register.
Did you miss your activation email?
Always stay logged in

Login with username, password and session length
Home Gallery Help Login Register
Pages: [1]   Go Down
Author Topic: Car seat recommendations that fit the Aztek?  (Read 2928 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline

Posts: 5

« on: March 03, 2012, 01:15:34 PM »

Hey Everyone,

We're at the stage where we need to move out of our infant child car seat into the next size up and we are having a hard time finding one that fits in the back of the Aztek.  Can anyone share what brand/model they have that fits?  Thanks.

It seems the rear seats are quite slanted so the line that needs to be level for rear facing (which we want to continue to do until she is older) is way off.  We tried an EvenFlo Triump 65 and we needed to raise the part of the carseat closest to the latch system by about 4 inches to make the line level!  This makes the carseat tip from side to side.  Not good!

Also, when I tried to install the same carseat in the forward facing position the back seat headrest was in the way of the tether strap, and it made it so the back of the carseat was not resting flush against the seat itself (it was resting on the headrest instead).

Thanks for any suggestions anyone can provide!

Intermediate User
Offline Offline

Posts: 35

« Reply #1 on: March 04, 2012, 10:40:17 AM »

I don't remember which brand of seat i had in my aztek for my niece but I had the seat positioned in the middle of the seat. This made it easier to turn around and tend to her when needed. If you look in the trunk area they have what looks like cargo hooks on the bed. I connected one of the straps their and the seat was level and pretty stable. Hope this helps.
Pages: [1]   Go Up
Jump to:  

Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Theme Underground Yellow