The ORIGINAL Aztek Fan Club

AZTEK GARAGE (Peer Support) => UPHOLSTERY/MODS-INTERIOR => Topic started by: Cokeologist on February 14, 2017, 01:14:10 PM



Title: Adding HUD to Aztek
Post by: Cokeologist on February 14, 2017, 01:14:10 PM
I am an original Aztek owner, purchased my Aztek in March 2001.  It now has 92000 miles and going strong.  I would like to add the HUD to my Aztek.  I searched the forum and found several threads that talked around the topic, but nothing definitive that I could locate or any indication that anyone had actually undertaken this mod. 

If someone could point me to a thread with specific how-to instructions, or if anyone has successfully installed the HUD unit in an original non-HUD Aztek and can share the experience, I would be appreciative.  Thanks in advance.


Title: Re: Adding HUD to Aztek
Post by: Bill Salina on February 16, 2017, 05:44:49 PM
<deleted>


Title: Re: Adding HUD to Aztek
Post by: Pontiac6KSTEAWD on April 09, 2017, 12:55:26 PM
Dash, no, speedometer bezel, and windshield bezel, yes.


Title: Re: Adding HUD to Aztek
Post by: Cokeologist on May 18, 2017, 09:43:06 PM
Still seriously considering giving this a go; what other pieces would I need besides the following:
  • HUD display unit
  • HUD controls bezel
  • Instrument cluster bezel with cutout for HUD control bezel
  • Gauge cluster with driver info center
  • Dash top trim piece with cutout for HUD display


Title: Re: Adding HUD to Aztek
Post by: Majora097 on May 21, 2017, 08:51:02 PM
I'm not sure this would be fully possible. They do sell aftermarket HUDs that you could use.


Title: Re: Adding HUD to Aztek
Post by: Cokeologist on May 27, 2017, 04:01:10 AM
Still seriously considering giving this a go; what other pieces would I need besides the following:
  • HUD display unit
  • HUD controls bezel
  • Instrument cluster bezel with cutout for HUD control bezel
  • Gauge cluster with driver info center
  • Dash top trim piece with cutout for HUD display

And of course the windshield


Title: Re: Adding HUD to Aztek
Post by: BlueGT on October 03, 2017, 03:07:42 PM
Still seriously considering giving this a go; what other pieces would I need besides the following:
  • HUD display unit
  • HUD controls bezel
  • Instrument cluster bezel with cutout for HUD control bezel
  • Gauge cluster with driver info center
  • Dash top trim piece with cutout for HUD display

And of course the windshield

I doubt it, my friend added an Aztek HUD to his 1998 Grand Prix because he liked that it is the only Pontiac HUD to light up red and the car did not have HUD originally, the image was just fine. We've added HUD to cars that didn't come with it from the factory before. From what I researched (I did do some as if I didn't get an Aztek with HUD, it was getting added, I miss it), the HUD windshields are no different, they are just checked on the line for the image. Worse case scenario is there would be a slight ghost image.