Help - Key Fob Programming Problem
Welcome to the site! Take a minute to register and join us. It's FREE! (and fun)
The ORIGINAL Aztek Fan Club Welcome, Guest. Please login or register.
Did you miss your activation email?
Always stay logged in

Login with username, password and session length
Home Gallery Help Login Register
Pages: [1]   Go Down
  Print  
Author Topic: Help - Key Fob Programming Problem  (Read 279 times)
0 Members and 1 Guest are viewing this topic.
averyguy
Noob
*
Offline Offline

Posts: 2


« on: October 05, 2017, 03:28:52 PM »

Hello!
I ordered this keyfob from Amazon.com: https://www.amazon.com/gp/product/B00KTJ4RUG/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

We had two keyfobs before, but we have either lost them or they stopped working (I currently have no other keyfobs, other than the one I just bought). The Amazon car configure program said it would work with my 2001 Pontiac Aztek. I tried using this program sequences:

1. Close all doors.
2. Press and hold the Unlock button on door lock switch on drivers door.
Hold until instructed to release in step 6.
3. Insert key into the ignition cylinder but do not turn it.
4. Remove key from ignition and then insert key into ignition without turning ignition cylinder and remove key.
5. Insert key in ignition a third time and leave key in ignition. Do Not turn ignition.
6. Release door lock switch on drivers door panel. A Chime will sound 3 times indicating that you are in programming mode.
7. Press both the Lock and Unlock buttons on the remote up to 30 seconds.
A chime will sound 2 times if remote has programmed successful.
8. Repeat step 7 if you are programming additional remotes.
9. Remove key from ignition to exit programming mode.

I have also tried turning the key to the "ON" opsition before following the steps and tried swapping step 3 and 2. Even though doing these things, I have not been able to get the car to beep the two or three times it is supposed to before holding down the lock and unlock buttons on the keyfob itself.

So, does anyone know a solution or have had this problem before? I'd be very grateful for your help.

Thanks!
- Avery
Logged
none
Member
*
Offline Offline

Posts: 18


« Reply #1 on: October 05, 2017, 10:17:41 PM »

That sounds correct to me, so let me ask some "dumb questions":

Do you ever hear the vehicle's chime working at other times? Perhaps the chime itself has become disconnected?

Are all doors securely closed? I remember when I did my car, the rear hatch was closed but somehow not completely.

That is all I can think of at the moment.
« Last Edit: October 05, 2017, 10:18:55 PM by none » Logged

2003 Aztek 2WD
averyguy
Noob
*
Offline Offline

Posts: 2


« Reply #2 on: October 06, 2017, 05:55:51 AM »

The chime does still work, it chimes when, say, the door is open with the key in ignition, and a few times after the car actually starts. The doors I'm sure were closed all the way, and it wasn't warning me of a door ajar. This is really confusing me. Thanks for your reply!
- Avery
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Theme Underground Yellow