Welcome to the site! Take a minute to register and join us. It's FREE! (and fun)
The ORIGINAL Aztek Fan Club Welcome, Guest. Please login or register.
Did you miss your activation email?
Always stay logged in

Login with username, password and session length
Home Gallery Help Login Register
Pages: [1]   Go Down
  Print  
Author Topic: Heat Blender Door  (Read 256 times)
0 Members and 1 Guest are viewing this topic.
Amphiduck
Member
*
Offline Offline

Posts: 3


« on: February 27, 2018, 02:19:34 PM »

Hello all,

Newbie here with Azteks and had a question on the climate control system.  I have an '04 FWD (single climate control) and the air conditioning blows hard in the cab.  When I turn it on to heat, it makes a lot of noise, but the air is very little movement.  I've torn out the knee bolster and underdash to replace the blender door actuator.  When I got to the actuator, the new and old both had full movement of the arm when plugged in.  Then, looking where the arm from the actuator connects, the little white Y-shaped plastic piece with the spring attached to it appears to be worn.  Is there a way to replace that part? Or replace the whole regulator unit with the arm? Is that even the cause? 

By the way, that is a huge pain to get to that actuator....

Thanks again for any insight!!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Theme Underground Yellow