Do all azteks have key-less entry? I cant program my new remote
Welcome to the site! Take a minute to register and join us. It's FREE! (and fun)
The ORIGINAL Aztek Fan Club Welcome, Guest. Please login or register.
Did you miss your activation email?
Always stay logged in

Login with username, password and session length
Home Gallery Help Login Register
Pages: [1]   Go Down
  Print  
Author Topic: Do all azteks have key-less entry? I cant program my new remote  (Read 5032 times)
0 Members and 1 Guest are viewing this topic.
usaaztek
Intermediate User
**
Offline Offline

Posts: 45


« on: April 16, 2011, 01:04:41 PM »

When I bought my Aztek used it didn't come with a keyless remote. I assumed all the azteks came with that option, so I bought a remote on ebay. I tried to program the Aztek with the instructions I found here. I can not get the Tek into program mode. No chims.....are these the right instructions?




1. Close all doors.

2. Press and hold the Unlock button on door lock switch on drivers door.
    Hold until instructed to release.

3. Insert and remove key from ignition 2 times. Do Not turn ignition.

4. Insert key in ignition a third time and leave key in ignition. Do Not turn ignition.
   
5. Release door lock switch on drivers door panel.
    A Chime will sound 3 times indicating that you are in programming mode.

6. Press both the Lock and Unlock buttons on the remote up to 30 seconds.
    A chime will sound 2 times if remote has programmed successful.

7. Repeat step 6 if you are programming additional remotes.

8. Remove key from ignition to exit programming mode.
Logged
usaaztek
Intermediate User
**
Offline Offline

Posts: 45


« Reply #1 on: April 18, 2011, 12:36:13 PM »

Does anyone have an Aztek without keyless entry?
Logged
doodlebug
Advanced User
***
Offline Offline

Posts: 66


« Reply #2 on: April 19, 2011, 05:11:27 AM »

why don't u run ur vin on compnine to make sure u don't have keyless entry???
Logged
alchemist
100 Club Members
****
Offline Offline

Posts: 771



« Reply #3 on: April 19, 2011, 04:14:08 PM »

You can confirm keyless entry fairly easily.  If you pull of the dash trim piece under the windshield (the one that has the automatic light sensor in it) then look down between the defrost duct and the rest of the dash you should see an electronic module with a connector going in to it.  That is the keyless entry.  If I remember right it is on the passenger side of the defrost duct.  If that unit is present then you should have keyless entry.  If it's not there there should at least be an empty connector where it could be plugged in.
Logged

If you can't fix it yourself, redesign it since it was obviously poorly designed to begin with, otherwise you could fix it yourself.  Right?
usaaztek
Intermediate User
**
Offline Offline

Posts: 45


« Reply #4 on: April 23, 2011, 05:21:09 PM »

Checked comp nine....it says

U0   LOCK CONTROL,REMOTE ENTRY(KEYLESS ENTRY SYSTEM) REMOTE ENTRY LK CONT(AU0)
41,606

for my vin....so does that mean I have keyless entry? or is it possible i am reading it wrong
Logged
MQV Son of Quinn
2004-2006 National Rally Organizer
Lifetime Member
*****
Offline Offline

Posts: 8165


When all else fails buy two


WWW
« Reply #5 on: April 24, 2011, 01:14:03 PM »

It should I don't think any Azteks made didn't come with remote access.

Jack
Logged

Jack Egan
Brunswick, Ohio
2004-2006 National Rally Organizer
Vietnam Veteran 3 tours of duty with the U.S. Navy
Realtor NextHome Inc.,
Former owner of Mighty Quinn IV
04 Black Tek MQV Son of Quinn
1SC with 17" wheels, overhead console, OnStar, steering wheel controls, Kenwood audio system with Sirius. Owner designed 10 speaker system includes, MTX-311-D Amplifier and 2 JL 6" Subwoofers, Infiniti Reference series, 6-1/2 componentfront doors, 6-1/2 rear door speakers, 4" cargo area speakers plus a Infiniti Reference series Amplifier to run them all.
Married 1 Son
AztekFanClub Supporter......If You Use This Site Regularly, Please Donate!!!!
aztek soldier
Noob
*
Offline Offline

Posts: 2


« Reply #6 on: April 28, 2011, 11:49:10 AM »

well just tried those instructions on my aztek and i herd the chime. it took a few tries. i noticed it only works if there is a pause each time you insert the key and also if you do it slowly. now i just need to make sure that this key fob will work http://www.amazon.com/2001-2005-Pontiac--Yourself-Programming-eKeylessRemotes/dp/B003UI9ZAU/ref=sr_1_1?ie=UTF8&qid=1304012897&sr=8-1
Logged
austriker
Bat-Tek
Paid Member
Lifetime Member
*****
Offline Offline

Posts: 1016


Bat-Tek Forever.


WWW
« Reply #7 on: April 28, 2011, 01:49:54 PM »

I dont know if this is helpful or not, but that looks to be the exact same key fob that came with my tek when I bought it (used).
Logged



from '02 'BlackTek' to ..... Bat-Tek .
my [out of date] tek blog, The Bat-Tek on cardomain
Short Bat-Tek Preview

2002 Aztek Black AWD: All Interior Lighting=>Red, Extended & Wide Angle Rearview Mirror, Front and Back Pontiac Emblem=> Black, Drive + Play via direct FM connection, Powerflow Pro-Fit Mud Flaps, V-Leds HID 35W 6000k 9006 Headlights, Front Turn Signals Amber LEDs,  Tinted Plastic Front License Plate Cover, Tinted Tail Lights, Front Windows Tinted, Brake Calipers Red, 18" Alba Rims on Pirelli P'Zero Nero AS Tires (235/50/18), Bat-symbol tinted front turn signals, Red accented dash interior
Please sell me a set of black Manik Tail Light Guard & a safari bar with mounts!!

1 Corinthians 10:31
usaaztek
Intermediate User
**
Offline Offline

Posts: 45


« Reply #8 on: May 22, 2011, 10:35:13 PM »

Still can't get this to work. I verified I have keyless entry, but I can not get the tek into program mode. I do not have the dic in my car. Is there another way to program with pulled fuses for Astros without the dic?
Logged
Aztek*GTP (Brenner)
100 Club Members
****
Offline Offline

Posts: 221


I wish I knew what I was doing....


« Reply #9 on: May 22, 2011, 10:40:31 PM »

Astros?    Sorry and I hate to ask in case I am having a brain fart but what do you mean by this?
Logged

There's nothing wrong with being cocky, as long as you can back it up.........
Don't give advice unless you know what you are talking about....
My goal is to succeed where others fail.....
If just anybody could do it then I wouldn't have a job...
Sorry about typo's as I work with my hands and do not spend as much time on the PC....
usaaztek
Intermediate User
**
Offline Offline

Posts: 45


« Reply #10 on: May 22, 2011, 11:08:08 PM »

My iPad corrected aztek to spell astros. Silly apple.
Logged
aeric
Member
*
Offline Offline

Posts: 16


« Reply #11 on: May 26, 2011, 11:29:46 AM »

I scanned through my Service manual (an electronic "set") and according to what I read, that programming sequence only works for the 2001's.  The remaining years only list a way to do it using a Tech2 scan tool (Read:  take it to the dealer...)  Certainly makes that cheap remote off eBay a lot more expensive.  You might check around at some of your local garages, they MIGHT have a Tech2, and be willing to do the programming cheaper than the dealer.  Just my 2 cents, but I think it's an abomination that stuff like that and all of the manufacturer specific OBDII stuff is not accessible via a garden variety OBDII reader.  There might be some computer based OBDII interfaces that can do it, but I don't know.  ~aeric
Logged
Wingnutandme
Member
*
Offline Offline

Posts: 19


« Reply #12 on: January 21, 2017, 03:33:23 PM »

I know this is an old thread, but I just programmed my 2005 replacement key fobs using the instructions provided by the original poster. My service manual says you need a scan tool, but I didn't find that necessary. Maybe this will help the next person.
Logged

2005 Black Rally
Bill Salina
Paid Member
100 Club Members
*****
Offline Offline

Posts: 248


2003 Gold FWD Aztek - aka "The Warthog"


« Reply #13 on: January 23, 2017, 07:45:12 PM »

I'm going to add that those instructions also worked for my 2003 Aztek FWD.

No need for a scan tool.

I would also add that ALL remotes you are using with your Aztek must be present and all must be added (or re-added) during the session.  For instance, if you only had one key fob and wanted to add a 2nd one, you put your Aztek in programming mode (steps 1 thru 5) then perform step 6 for both the original fob AND the new one. 

For those new to the Aztek, there is also a way for you to program your own keys without having to visit the dealer.  You can do it yourself as long as you have at least one working key.   Search the forums for the procedure....
Logged

Bill (aka Bird Dog)
2003 Gold FWD Aztek "The Warthog"
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Theme Underground Yellow