Welcome to the site! Take a minute to register and join us. It's FREE! (and fun)
The ORIGINAL Aztek Fan Club Welcome, Guest. Please login or register.
Did you miss your activation email?
Always stay logged in

Login with username, password and session length
Home Gallery Help Login Register
Pages: 1 [2]   Go Down
Author Topic: 3.4L V6 Teardown Part 2 - The Front End...  (Read 19271 times)
0 Members and 1 Guest are viewing this topic.
100 Club Members
Offline Offline

Posts: 197

« Reply #15 on: December 20, 2010, 07:39:24 PM »

Last thing I did this session was remove the manifold coolant hose from the coolant line going around the front of the engine.  Just undo the clamps and pull it off:

Next use an 11mm (YES, 11mm) socket to remove the bolt hold the bleeder tube to the block:

Now, that black metal coolant line can be easily lifted out the way for future steps:

And now, the engine looks like this:

That's it for now Smiley

Pages: 1 [2]   Go Up
Jump to:  

Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Theme Underground Yellow